Ansel Vandal P/T Guide d'installation

H.264 Mega-Pixel / Multi-Profile Network Cameras Quick Start Guide 2009 Nov.

102.4 Box and Gun Type Cameras Audio Output Jack Audio-out Jack allows this device to output audio for two-way communication or alerting sound. DC

11This LED will be flashing while camera is accessed by remote client. DI/DO Connector The Camera provides a terminal block with 6 pins of connect

123. Connect RS485 D+ and D- (if you need to control PT scanner) 4. Connect the attached power adapters to camera and heater (option/by model) and p

133. Plug an Ethernet cable into the Camera Connect an Ethernet cable to the LAN socket located on the Network Camera’s bottom and attach it to the

14 Note 1: If no IP address is assigned within 30 seconds, the networked device will automatically assign 192.168.0.100. User may now open your

2 Table of Contents 1. System Requirements ...

3About multi-profile Multi-profile stands for simultaneously video streams. These Network Cameras can generate H.264, MPEG4 and MJPEG streaming simul

42. Physical Installation 2.1 Dome Type Cameras 1. RJ45 LAN socket: Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX

5power adapter included in package. 5. MIC in (audio in) Connect a microphone to the network camera. 6. Line out (audio out) Connect a loud spe

6 2. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the supplied four retaining screws to secure the mai

7 7. Done 2.2 P/T Camera Audio Output Jack It allows this device to output audio or alerting sound. DC Power Jack The input power is 12VDC. N

8 Wall Mount 1. Fix the L-type bracket to the wall using two holly wall anchors and screws 2. Fix the camera to L-type bracket with the two sup

9 3. Factory Default Reset This button is used to restore the all factory default settings. 4. DC-in Jack The input power is 12VDC. Note that su